Know your gear
5500 devices are designed for mounting on 19-inch racks where transient voltage surge suppression is desired for rack-mounted electronic equipment. Cat. No. 5500 offers a total of 12 protected outlets, 10 in back and two in front, to provide for the easy, convenient plug-in of all mounted equipment. Its advanced circuit design offers extremely tight clamping levels and exceptional noise attenuation. Each receptacle provides Normal Mode (L-N) and Common Mode (L-G, N-G) protection. Each unit is provided with an on/off rocker switch, power, protection and outlet polarity/ground status LED diagnostics, a resettable overload circuit breaker and a 12 foot power supply cord. The unit will continue to provide power in the event that protection is lost. Both the 5500-190 and 192 models are UL Recognized Component TVSS 1449 Standard, 330 Volts peak and CSA Certified.
The 19" Rack Mount Surge Protective Devices (SPD) are designed for use on AC power lines. These devices have been tested to ANSI/IEEE C62.41 standards for Categories A and B environments.
Additional Specifications:
Rated Line Voltage: 120V
Load Current: 20A
Max Continuous Operating Voltage: 135V
Operating Frequency Range: 50, 60 Hz
Circuit Type: Staged multi-component, series
Max. Single-pulse transient current: 33000A
Rated single-pulse transient energy: 300 Joules
EMI/RFI noise rejection@50 Ohms 5kHz-100MHz: 50-60dB
Cat. A ringwave (6kV, 200A, 100kHz): 190V
Cat. B ringwave (6kV, 500A, 100kHz): 210V
Cat. B impulse (6kV, 3kA, 8x20 µs): 310V
UL 1449 ratings (8x20 µs @ 500A)(L-N/L-G/N-G): 330/330/330
The 19" Rack Mount Surge Protective Devices (SPD) are designed for use on AC power lines. These devices have been tested to ANSI/IEEE C62.41 standards for Categories A and B environments.
Additional Specifications:
Rated Line Voltage: 120V
Load Current: 20A
Max Continuous Operating Voltage: 135V
Operating Frequency Range: 50, 60 Hz
Circuit Type: Staged multi-component, series
Max. Single-pulse transient current: 33000A
Rated single-pulse transient energy: 300 Joules
EMI/RFI noise rejection@50 Ohms 5kHz-100MHz: 50-60dB
Cat. A ringwave (6kV, 200A, 100kHz): 190V
Cat. B ringwave (6kV, 500A, 100kHz): 210V
Cat. B impulse (6kV, 3kA, 8x20 µs): 310V
UL 1449 ratings (8x20 µs @ 500A)(L-N/L-G/N-G): 330/330/330
Add to Compare