Tripp Lite Remote Control Module Inverters and Inverter / Chargers - power control unit
$257.92
$159.99
Mfg # APSRM4
CDW # 721598
Know your gear
The APSRM4 Remote Control Module lets you monitor and control your Tripp Lite PowerVerter inverter (PV-Series) or inverter/charger (RV-, APS- and EMS-Series) from up to 15.24 m (50-ft.) away. Ideal for automotive, remote site, industrial, commercial and residential applications, the APSRM4 mounts easily in a variety of locations and configurations, including below a dashboard, so you can control your inverter or inverter/charger from the comfort of your vehicle.
Monitor battery charge level and the connected inverter’s mode at a glance via the front-panel LEDs. The compact, heavy-duty all-metal housing also includes a convenient switch that lets you toggle between inverter and charger modes. A master override port enables automatic shutdown under various conditions, such as when the vehicle’s ignition is on or off, the battery is disconnected or water is encroaching.
Built-in mounting slots and a 15.24 m (50-ft.) cable provide plenty of flexibility in mounting and operating the APSRM4. You can even daisy-chain multiple units to connect to a single inverter or inverter/charger. A faceplate is included for front-panel mounting in an RV, boat or other vehicle.
Monitor battery charge level and the connected inverter’s mode at a glance via the front-panel LEDs. The compact, heavy-duty all-metal housing also includes a convenient switch that lets you toggle between inverter and charger modes. A master override port enables automatic shutdown under various conditions, such as when the vehicle’s ignition is on or off, the battery is disconnected or water is encroaching.
Built-in mounting slots and a 15.24 m (50-ft.) cable provide plenty of flexibility in mounting and operating the APSRM4. You can even daisy-chain multiple units to connect to a single inverter or inverter/charger. A faceplate is included for front-panel mounting in an RV, boat or other vehicle.
Add to Compare
Enhance your purchase
Tripp Lite Remote Control Module Inverters and Inverter / Chargers - power is rated
4.70 out of
5 by
6.
Rated 5 out of
5 by
Joel from
would buy again
great stuff!!
Date published: 2020-09-29T00:00:00-04:00
Rated 5 out of
5 by
Road scholar from
Excellent product & easy installation
I find this product reliable and really helps prevent inadvertant battery drain. It was very easy to install & is NOT an eyesore.
My only problem is that I'm not really conversant with electronic terminology, which may be why the instructions and settings are confusing to me. Every time I need to use it, I need to refer to the instrux to make sure I'm not doing the opposite of what I want to do. The labels on the unit have very small print, so I've had to tape a copy of the instrux next to the unit for reference. Because of my lack of expertise, understanding these is a bit harder than I would like and often I have to read them multiple times to make sure I understand what they mean. All in all, this pales in comparison to the service it provides. (PS-make sure the cable doesn't have too much tension applied to it or its connector clip can be pulled out making it inoperable. I check this regularly.)
Date published: 2014-10-29T00:00:00-04:00
Rated 5 out of
5 by
JBROWN from
Nice product!
Very easy to install! The inverter was installed behind the drivers seat in a company vehicle. Had to move seat each time to turn inverter on. With the new module, I was able to install the turn on switch in an easily accessable and viewable location. Now I can turn my inverter on with a swith and constantly monitor the battery charge and load levels.
Date published: 2012-03-08T00:00:00-05:00
Rated 5 out of
5 by
Mr.X from
Great product.
Instruction are super clean, everything is supplied to make a very clean install. Glad I bought this it made my inverter turn on and off easily with the ign key!
Date published: 2023-12-21T00:00:00-05:00
Rated 5 out of
5 by
Owen from
Nice addition, should come standard, wish plate was smaller.
Installed in my 2004 Roadtrek 210P in the electrical panel. Very nice that it came with a long cord so I didn't have to worry about whether or not it would reach. Wish it came with a much smaller faceplate (maybe height the same as the switch body and width just large enough for the text) so that it would fit in an existing panel easier.
Functionality is just what I want: turn off the inverter when dry camping and not using the AC power. Makes the batter last WAY longer and I don't have to crawl around under the bed to turn it off and on.
One minor nit: it blinks when plugged into shore power and the inverter is off, signaling that the inverter is not supplying any AC power. Not sure why I would need to know this since when I'm plugged into shore power the shore power is supplying the AC, not the inverter.
Date published: 2021-12-27T00:00:00-05:00
Rated 5 out of
5 by
Do it yourselfer from
Great add on to inverter
Purchased this as add on to new upgraded inverter for 2005 Roadtrek RV. Love being able to turn on and off remotely. Should have bought this years ago! Would definitely recommend this product.
Date published: 2022-01-30T00:00:00-05:00