Fluke Networks 325 True RMS Clamp Meter
$419.99
$397.99
Mfg # FLUKE-325
CDW # 2889600
Quick tech specs
- True-rms AC/DC current,voltage,temperat- ure,frequency
- Versatile tool performs most front-line measurement tasks
Know your gear
The Fluke Networks 325 True-rms Clamp Meter is a reliable, versatile troubleshooting tool for commercial and residential electricians. It features a slim design for easy transport and use, and a large display for efficient troubleshooting.
Add to Compare
Enhance your purchase
Fluke Networks 325 True RMS Clamp Meter is rated
4.50 out of
5 by
27.
Rated 5 out of
5 by
Brad Wilmot from
Excellent hardware, not so excellent software.
The hardware is beyond spot on. Will never use anything else. Fluke is the only brand of test equipment I trust my life with. I have no less than 10 Fluke meters...
The Fluke Connect service? Not so much. It hasn't worked right in months (spotty on the phone and tablet (works for a while, then freezes up and refuses to sync for days at a time). The web service hasn't worked properly since last year (loads 1 time in 20).
I will not be renewing my subscription, as for what I spent on that subscription, I could by another meter. It's a great idea that got ruined on some level. (now, the ability to read a meter wirelessly? Where has THAT been all my life?)
Rework the software side of FC, and you've got yourself a SERIOUS winner.
(4 stars only because of the FC service mess) If you're after just hardware, you can't go wrong. If you're after the FC service? I can't recommend it at this point.
Date published: 2016-12-04T00:00:00-05:00
Rated 5 out of
5 by
nemonis from
Min/Max has no average feature
The meter is everything it is advertised to be. One point to be aware of is that min/max is more limited on this meter than many other Fluke products. Many of their meters have a min/max/average feature. This meter only stores min and max, not average. Other than that, it seems like a well built meter with a solid feature set.
Date published: 2013-11-28T00:00:00-05:00
Rated 5 out of
5 by
TenGauge from
Best clamp meter I've owned
I've had this meter going on 2 years. I work on HVAC and Automotive repair. I can check older ignitions, charging, circuit draws, and starter systems. It's extremely versatile for HVAC and compressor diagnosis. It's ruggedness makes it useful indoors and outdoors.
Date published: 2016-12-28T00:00:00-05:00
Rated 5 out of
5 by
GibbyHVAC from
Best meter for the money!
I run HVAC service and use this meter a lot. Always performs, is rugged, and for most measurements I use is the best in it's class. Can't go wrong with this one.
Date published: 2016-12-10T00:00:00-05:00
Rated 5 out of
5 by
Wirez from
Best bang for the buck
I do the HVAC work for my company and used this meter. For my company-approved side jobs, the first thing I tooled up with was this meter. All the bells and whistles: =400 A AC, 600V AC plus D.C. And ohmmeter. The operating temp metering a plus.
Date published: 2016-12-07T00:00:00-05:00
Rated 5 out of
5 by
Plkff from
Good for HVAC service
Ive had a 324 for 2 or 3 years and it is a great bag meter. It is a great price point for an everyday meter.
Pros- simple, reads quickly & compact size
Cons- none because it lives up to it's specs, but if i lost this one i would probably upgrade to the 325 for the higher range of resistance. I also wish the dcv had a 100th digit (resolution reads to the 10th. However, i also have a 177 when i need precise dcv and a higher resistance range. I have several coworkers that have bought this meter because of its value.
Date published: 2016-12-07T00:00:00-05:00
Rated 5 out of
5 by
techcraft45 from
Excellent HVAC clamp meter
I bought the Fluke 325 while still in HVAC school, and use it daily in the field at my job now. All the functions of the meter are useful on my job without a lot of extra frilly stuff id never use. I worked as a electronics repair technician before going into HVAC, and I've always used Fluke meters. The Fluke 325 is a first class tool
Date published: 2013-06-01T00:00:00-04:00
Rated 5 out of
5 by
BMac from
Meter is simple and Reliable
I bought this Fluke-325 clamp meter recently at my new company due to my satisfaction with the one I had at a previous employer. It's easy to carry with my computer when I go to customer sites and always reliable for the needs of a controls engineer.
Date published: 2016-12-22T00:00:00-05:00
Rated 5 out of
5 by
Bengineer from
Great meter for everyday use
I bought this meter over a year ago and it has been great. I mostly use it for automotive diagnosis. It is great for chasing issues related to excess current draw. It's also great around the house. You can't beat it for the price. My only complaint is that it defaults to AC mode.
Date published: 2016-12-07T00:00:00-05:00
Rated 5 out of
5 by
MarkKw from
Indispensable for maintenance and RV work.
This is a great meter that comes with all the necessary functions needed for general industrial maintenance and especially the combined AC/DC, generator and solar-PV systems in RVs. Very nice to carry one meter that makes life easier and work more expedient.
Date published: 2016-12-08T00:00:00-05:00
Rated 5 out of
5 by
JuanCaterpillar from
Good for the money
I purchased this amp clamp a few yeas back and its been a great little clamp. It is fast enough to read the changing amps and good price point. It works well as a back up meter or a secondary meter when I need one. I hope to get one with a flex clamp but for now this one still does the job I need it to.
Date published: 2016-12-09T00:00:00-05:00
Rated 5 out of
5 by
Joel325 from
Excellent compact meter
I have been using Fluke meters for years and find them to be quality tools. The Fluke meter on my cart right now is the Fluke 325 clamp meter. It is compact and has the features that I need as I work in facility maintenance.
Date published: 2016-12-07T00:00:00-05:00
Rated 5 out of
5 by
Scrubb from
Durable, Reliable
I have had my 325 True RMS meter almost a year. I am very happy with ease of use, and accuracy. However i have a model 36 clamp meter that has lcd issues, ghosting some call it. Not had any luck finding repair parts for the 36 model thus far.
Date published: 2016-12-11T00:00:00-05:00
Rated 5 out of
5 by
Fordracinjunkie from
Feature packed
I had the meter for several months. Used it for everything from HVAC to checking amps on a car battery. But someone liked it better than me. I can't wait to get another one.
Date published: 2016-12-08T00:00:00-05:00
Rated 5 out of
5 by
Old School from
Another Great Product from Fluke
As a long time user of Fluke test equipment, I am very pleased with the functionality and ease of use. The meter is accurate, rugged and simple to use. As an OEM of industrial automation products we now use Fluke exclusively in our electrical department.
Date published: 2016-12-07T00:00:00-05:00
Rated 5 out of
5 by
jtaborsky from
Slightly disappointed
Heads up, this is going to be a long read.
For background, I do electrical controls for a living, primarily HVAC/temperature controls. We use a lot of thermistors, current transducers, PLC's, pressure transducers, and other devices to control air handlers, pumps, and fans.
I've owned this meter about six months. I bought it to replace the Fluke 322 in my tool bag for work. The 322 has been great for the roughly seven years I've owned it, but it doesn't read resistance high enough to test 10k thermistors, so I always carried a second meter in my pickup specifically for reading resistance. I thought a 325 would bring me down to a single meter, since it does everything my 322 does with the addition of up to 40k ohm resistance capability (temperature readings are also a perk, but not part of why I decided on this model. The 325 works as expected for measuring voltage, resistance, frequency, direct current, and sometimes alternating current (more on that to follow). I cannot confirm the temperature readings, since I've never found two temp sensors that perfectly agreed with one another, but I do not trust this meter as much as the Fieldpiece and Amprobe in my pickup, mostly because of how cheesy the thermistor lead looks.
I have one major gripe and several minor gripes about this meter. The minors are annoying but livable. I'll start with those: 1) The TL75 leads are unreasonably stiff at room temperature. The leads that came on my 322 and those that I've used on other brand meters are reasonably flexible out of the box and get better with age. Six months later, and I still have to uncoil these from around the meter. 2) The case is too small if you store the leads in it with the meter, and don't even think about leaving the leads connected if you want to zip the case! 3) The knob could be a little tighter. It often gets turned on by wrapping the leads around it (see point 1).
The major issue I have with this meter is when it comes to alternating current. I quickly ran into discrepancies between current transducers' and this meter's readings when checking out variable frequency drives. The numbers were far off enough that I replaced current transducers thinking they were faulty, and even returned my first 325 to buy one straight from fluke, thinking I had a faulty/knockoff product. It took a few occurrences before I contacted Fluke regarding the issue. As it turned out, "True RMS" measurements will not align with conventional measurements when it comes to nonlinear loads, such as VFD outputs. True RMS also won't agree with motor nameplates. I was basically told that this meter is "too" accurate, so its readings aren't usable, which doesn't make much sense. I equate it to people who use "upper-level" words at the risk of hindering communication with 90% of people; you're somehow superior (cool), but you've missed the goal of verbal language, which is to communicate with other people.
I would have preferred a meter that measures as my 322 does but with the addition of higher resistance. I thought this would be the ticket, but I still carry two meters.
If you never encounter nonlinear loads, this meter will be awesome for you! For me, it hasn't lived up to the price tag.
Date published: 2020-09-18T00:00:00-04:00
Rated 5 out of
5 by
Thatcatnameddood from
It’s smaller, lighter and more features packed.
I use this everyday at work. And I suffer from white gut butt. So big heavy tools make my pants fall down. This meter does every thing I need and more. Definitely recommend for professionals
Date published: 2020-09-17T00:00:00-04:00
Rated 5 out of
5 by
The doctor from
Functions and reliability
Always preferred Flukes for their reputation .
Always used flukes.
Date published: 2020-09-20T00:00:00-04:00
Rated 5 out of
5 by
Captain Voltage from
Great meter for the serious electrician.
Great meter for the serious electrician and troubleshooter.
Date published: 2021-06-17T00:00:00-04:00
Rated 5 out of
5 by
Menon from
Poor Quality and Support
I have this meter(out of warranty. The battery terminals lost its spring effect making the contacts loose. On requesting the service center for replacement / repair service, they asked me to purchase a new meter for they have no spares and do not repair this meter any more.
Date published: 2020-11-19T00:00:00-05:00
Rated 5 out of
5 by
Laurie from
Good instrument, lame manual
Basic functionality is as described. However, the "manual" is unintelligible. The pictures don't really work for me. Not sure what they are trying to say.
Date published: 2021-06-30T00:00:00-04:00
Rated 5 out of
5 by
Mitch from
325 True RMS Clamp Meter
Excellent meter! I bought the first one through Amazon. It was a cheap Chinese knock-off which I returned. Went to Fluke and bought the real thing! No regrets!
Date published: 2021-04-27T00:00:00-04:00
Rated 5 out of
5 by
lightman from
very precise, good quality, too little fleatures.
I work with high power AC and DC and need a clamp meter i can trust, this one is, it is very precise, the DC A measure is excellent, as to be expected from fluke of course, but the clamp functionality is very basic, no in-rush current, hold function doesn't work like the 97 series do, no power factor measure, no diode measure capability (Basic! come on!) and no THD measure, the Hz measure is awesome because it works with current and voltage, my other clamp meters only measure Hz with voltage, neat feature fluke!, the clamp is tiny and very confortable to use, display is not as good as, let's say the 117 meter, backlight is too dim, i usually work in places with low light and it is an issue for me, overall, i like it, and recommended it, but you should at the very least, add DIODE, in-rush current, and THD measure please.
Date published: 2018-05-18T00:00:00-04:00
Rated 5 out of
5 by
EricB from
Better than my previous one
i had a UEI Multimeter prior to this (pretty much the same functions, but after years of use was beginning to glitch on certain settings). got this model in response to the need to have a very functional multimeter, and i am confident that it will surpass the predecessor. the labels are fairly straightforward, and the automatic scale change is vital when measuring different ohm ranges. i also needed the clamp-on ammeter so i could leave the device on the wire whilst checking other numbers.
Date published: 2022-01-05T00:00:00-05:00
Rated 5 out of
5 by
Mr Bruce from
Great Meter, The Test Leads Suck in Cold Weather
I have just purchased a Fluke 325 Clame Meter and I love the meter so far but the test leads that come with this meter DO NOT LIKE THE COLD WEATHER! I have purchase a number of meters over the last 30 years and these leads have to be the worst that have shipped with a new meter ever. These leads are as user friendly as trying to drag as wild cat through an antique store by it’s tail (I happen to love cats by the way and would much rathr drags the Fluke purchasing rep by his or her tail rather than a cat. This is really too bad considering the price that Fluke charges for their test equipment compared to other vendors.
Date published: 2022-01-13T00:00:00-05:00
Rated 5 out of
5 by
Joe joe from
Great little meter
Just recently purchased a used rv.
And having some electrical issues with it so i purchased the fluke 325 meter.To help with diagnosis the problems,works great easy to use!!!!!
Date published: 2023-12-19T00:00:00-05:00
Rated 5 out of
5 by
Isra from
Fluke 325
day trying it and it is inevitable not to want to use it all is time; excellent tool
Date published: 2024-01-10T00:00:00-05:00