REbox network device enclosure/chassis
$2,000.00
$1,349.99
Mfg # RE4XB
CDW # 298258
Know your gear
The Commercial REBOX® cabinets are specifically designed for housing remote and network equipment and exceed the stringent requirements of UL and Telcordia™ enclosure standards. The resulting safe and secure environment surpasses the industry for protecting communications equipment in locations such as classrooms, warehouses, and retail outlets. Use the pre-configured commercial REBOX as a small remote data center. Each cabinet includes dedicated mounting for hubs and other active equipment and another dedicated mounting area for patch panels. Use the unloaded commercial REBOX in applications such as horizontal cross connects or the telecommunications room. The modular design of this cabinet is very versatile, allowing the installer to configure the cabinet with a wide variety of accessories to mount any type of components.
Features:
Accommodates fiber and multimedia Snap Fit connectors
Unique knockout for metal and PVC raceway
Cable entry knockouts for conduit sizes from 1/2” to 1.5”
Patch panel bracket allows bottom-hinged, front-access termination
Flexible mounting for active equipment including hubs and UPSs
Door lifts off when open for easy installation, hinge easily reversed in the field
Engineered airflow to prolong the life of active equipment
Knife-edge design and sloped door resists dust, water, and vandalism
Specifications:
SPECIFICATIONS
16 gauge CRS welded construction
Designed specifically for hostile environments: Tamper resistant per Telcordia™ GR-487-CORE; Ventilation pattern developed to comply with UL 1950; Designed to meet NEMA 2
Durable powder coat finish
2 sets of universal mounting rails with #12-24 tapped holes 5/8”, 5/8”, 1/2” EIA standard pattern
Load capacity: 100 lbs.
Accepts maximum hub depth of 14.5” (RE2 and RE4) or 22” (RE4X)
Abundant cable entry through sides, bottom, and top - compatible with major raceway and popular conduit sizes
Designed to dissipate 160W - industry maximum without fan
Weight: RE4 = 50.6 lbs.; RE2 = 45.1 lbs.
Included:
base/rear section with 19” brackets for 2 hubs
1 front door with 2 locks (NSQ tool)
1 set 19” extension brackets for 2 additional hubs (RE4 only)
1 set 19” bottom hinge brackets for patch panels
Features:
Accommodates fiber and multimedia Snap Fit connectors
Unique knockout for metal and PVC raceway
Cable entry knockouts for conduit sizes from 1/2” to 1.5”
Patch panel bracket allows bottom-hinged, front-access termination
Flexible mounting for active equipment including hubs and UPSs
Door lifts off when open for easy installation, hinge easily reversed in the field
Engineered airflow to prolong the life of active equipment
Knife-edge design and sloped door resists dust, water, and vandalism
Specifications:
SPECIFICATIONS
16 gauge CRS welded construction
Designed specifically for hostile environments: Tamper resistant per Telcordia™ GR-487-CORE; Ventilation pattern developed to comply with UL 1950; Designed to meet NEMA 2
Durable powder coat finish
2 sets of universal mounting rails with #12-24 tapped holes 5/8”, 5/8”, 1/2” EIA standard pattern
Load capacity: 100 lbs.
Accepts maximum hub depth of 14.5” (RE2 and RE4) or 22” (RE4X)
Abundant cable entry through sides, bottom, and top - compatible with major raceway and popular conduit sizes
Designed to dissipate 160W - industry maximum without fan
Weight: RE4 = 50.6 lbs.; RE2 = 45.1 lbs.
Included:
base/rear section with 19” brackets for 2 hubs
1 front door with 2 locks (NSQ tool)
1 set 19” extension brackets for 2 additional hubs (RE4 only)
1 set 19” bottom hinge brackets for patch panels
Add to Compare