Eaton Tripp Lite Series Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE, Blue, 7 ft. (2.13 m) - patch
$9.10
$6.99
Mfg # N201-007-BL
CDW # 415021
| UNSPSC 26121609
Quick tech specs
- Premium cabling for Category 6 Category 5e and Category 5 applications; Blue 7ft
- Snagless RJ45 connectors protect against broken tabs
- High-Quality 24 AWG stranded copper wire
- Rugged PVC jacket stands up to long-term use
- Tripp Lite is now a part of Eaton
- Rated for 550MHz/1 Gbps communications
- Meets Cat6 TIA/EIA standards
- Reduces impendence and structural return loss
- Cat6 UTP cable/ patch cord/ ethernet cable/ network cable/ cat6 cable/ gigabit ethernet cable/ ethernet cord
Know your gear
Category 6 cabling provides faster network transmission speeds (up to 1 Gigabit per second) and supports a wide variety of applications including: 1000BASE-T Gigabit Ethernet, 100BASE-T Fast Ethernet, 10BASE-T Ethernet, 100Mbps TPDDI, 155Mbps ATM, ISDN and Voice.
Key Features:
• Designed to meet Category 6 specifications: reduces cross-talk and return loss
• RJ-45 Male snagless molded connectors with strain relief
• Rated for up to 1Gbps communication
• 50 Micron gold plated connectors
• Lifetime guarantee
Technical Specifications:
• PVC 4-pair stranded UTP with 24 AWG conductors
• Attenuation (Max.): 26.1 dB/100 m
• Frequency: Up to 350 MHz
• Impedence: 100 ohms ± 15%
• Resistance: 24.3 ohms/1000 ft
Key Features:
• Designed to meet Category 6 specifications: reduces cross-talk and return loss
• RJ-45 Male snagless molded connectors with strain relief
• Rated for up to 1Gbps communication
• 50 Micron gold plated connectors
• Lifetime guarantee
Technical Specifications:
• PVC 4-pair stranded UTP with 24 AWG conductors
• Attenuation (Max.): 26.1 dB/100 m
• Frequency: Up to 350 MHz
• Impedence: 100 ohms ± 15%
• Resistance: 24.3 ohms/1000 ft
Add to Compare
Enhance your purchase
Tripp Lite Cat6 Gigabit Snagless Molded Patch Cable (RJ45 M/M) Blue, 7' is rated
3.67 out of
5 by
3.
Rated 5 out of
5 by
JV2018 from
Quality product
We are doing Cisco switch upgrades at all of our sites. We just completed our 4th site and have used approximately 1000 cables without any issues. I have done this upgrade in the past and we usually have a few new cables that are defective. I would recommend this product because of the quality and its connectors.
Thank you!
Date published: 2018-11-08T00:00:00-05:00
Rated 5 out of
5 by
Jackie27 from
RJ45 too tight
Once plugged into a network port, the RJ45 is slightly too large. When unplugging the cable, it pulls against network port to the point that it feels as if the port itself is going to break. It did not matter the type of port (switch, PC, laptop, etc.). Every cable used had the same effect.
Date published: 2019-03-07T00:00:00-05:00
Rated 5 out of
5 by
johnjuan from
Better for network switches - no hood
When un patching cables from a network switch the typical hood over the clip makes it difficult to depress the clip and remove the cable. This model does not have a hood so it is easy to remove.
Date published: 2017-04-19T00:00:00-04:00